Hellier Train Care

So, I've decided to make a few modifications to my class 56. To begin with, to smooth out its running I'll simply be chopping off the capacitor near the motor, as from my understanding, this can cause problems when running a loco on dcc. Once this is done, and I've made any other requirements for it to run smoothly, I will work on motorizing the roof fans. From what I've read, this can be done by installing an additional decoder (and set it to a different number) which connects up to a specific motor (a mashima 1020) which should fit in the space left when removing the drive shaft. Then all I should need to do is to program the chip before installing it (I'll be making use of the speed function that usually controls the loco's main motor) and add a little rubber ring to the end of the motors drive shaft to enable it to rotate the fans at the speed I require, when I want it. When I start on this, I will add pictures showing what I'm doing.

For quite some time now I've been trying to come up with an interesting name for my layout as it stands at the moment. I've come to the choice that for now, due to the size, that it would be best to make it a branchline of sorts, though this would change when I manage to get a place of my own and expand it, thankfully how its put together at the moment and the fact I have a few redundant points in it will make it much easier to achieve. As for the name, I'm thinking of calling it something like the Woodbury Line, though I am still to make my final decision regarding its name, suggestions are welcome though.

Well as most of my track is down, I've started ballasting the track, half the track so far is ballasted, which is one boards worth so I have the remaining board to ballast, once this is done I will be looking to start adding and planning the scenery. Something I have started on already, I have started to create a tunnel that covers half the track of one of the boards, this is something I'll show in future pictures.

As not much has been done to the layout recently, the blog laid more or less dormant. Though now of course two posts come up at once. So recently my birthday came around and I gained a few extra wagons, now I already had the appropriate loco to pull them so I just had to chip it. This however is where the problems started, once I installed the chip and reassembled the body, I noticed a strange issue with the lighting, only one ends lights, if any were on when they were meant to be on. So a bit of fiddling later, almost giving up and returning it and checking the internet, I came across a couple of articles about the lights on Hornbys class 56. Satisfied that it wasn't a dodgy unit, to a certain extent, and more of a manufacturing fault, I reinstalled the chip (having removed it earlier to test it on analogue control before almost giving up completely). After cleaning the light contacts and making adjustments to the springs on the body to help improve the lighting powe...

So I keep telling myself that I'm not going to be using settrack on my layout due to the issues it causes if anything with a short wheelbase is run over it (mainly shunters with 0-6-0 or 0-4-0 wheel arrangements) But as happens I see that I can add more track to part of the layout and this track, due to the geometry, has to be set track, so I set about making it live, but of course I refuse to use Hornby's DCC staples, so I set about making my own modifications.   The back of  a Peco settrack point, as out the box   Most of the webbing cut away along one section.   Small sections of wire soldered to join the required rails   View from top once installed on track.  Now although they may be slightly more intrusive at this point, they should more or less disappear when the track is ballasted.

Now this is what you call frustration, I purchased 1 roll of woodland scenics track bed, purely because from looking at the length I thought it would be enough, clearly though, it wasn't enough, leaving me with gaps under the left side curve. Fortunately though I got all the other track bed down without too much of a problem. So my next step is to get another pack of track bed, which I will need for the yards anyway so most of is should get used up. Then I'll wire in the power to the bus lead under the board to send a test train round on, this will pick up on any possible problems I may encounter before I take up all the track, go over it all with a track rubber and stick it down. I'll then test it all again to be sure everything is fine before installing the point motors which will be controlled via dcc, I know some people don't like the idea of dcc points but I have no room for a control box and sometimes I'd like to sit down and watch trains go round, c...

So this is how it looks for now, of course nothing is actually fixed in place as most of it will be risen up (thought I'm not sure how some of my locos will manage the inclines so I guess I'll have to see when it comes to it. Now on the left side I'll be using some wood to rise up the track to the required hight, but of course to have motors under the track I'll need to leave gaps in the wood as well as putting a thin sheet over the top to conceal the gap. Despite this I have been temped to use some of the woodland scenics inclines and risers to do the same thing, my only issue with the wood at the moment is that they are not wide enough to fully conceal the under board motors though I can remedy this when it comes to adding the scenery. Initially I was going to make the passing loop removable in one section, though I now believe that that will make things more difficult for me and perhaps my better option would be to forgo that idea. Instead I'm tempted to...